Timken u298 Bearing

Grease Speed Rating n1:6400 rpm; B:40.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:199000 N; d:120.000 mm; Fillet Radius rb:1.00 mm; D:215.0000 mm; Basic Static Radial Load Rating Co:193000 N;

D:650 mm; Grease:6410 kN; B:157 mm; rs (min):6 mm; with tapered bore:420 min-1; Oil:464.980 kN; Static (Cor):22.3 mm; d:440 mm; Pu:3210 kN; with cylindrical bore:350 min-1;

A1:88.9 mm; L:330.2 mm; Cap bolt, SAE grade:8; P120°:28.9 kN; Cap bolt recommended tightening torque:298.3 N·m; H2:38.1 mm; Mass pillow block:24.9 kg; H:187.325 mm; Ca:45.796 mm; Cap bolt:2 x 5/8-11 UNC;

ba:50.006 mm; P60°:178 kN; R2:31.75 mm; Cap bolt recommended tightening torque:298.3 N·m; End plug (suffix Y):EPR 13; H1:125.425 mm; Eye bolt:2 x 3/8-16 UNC; L:419.1 mm; A1:120.65 mm; Bearing:22222 EK;

D:72.0000 mm; Basic Static Radial Load Rating Co:15000 N; B:19.00 mm; d:20.000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:30700 N; Sealed Speed Rating

Dimension G:12.7 mm; Pin Dia A1:6.4 mm; Dimension S1:22.2 mm; Dimension H:25.4 mm; Basic Dynamic Radial Load Rating:15600 N; Dimension D2:68.3 mm; Shaft Diameter D:30 mm; Dimension N:19.8 mm; Dimension B:104.8 mm; Basic Static Radial Load Rating Co:11200 N;

Sealed Speed Rating n3:2400 rpm; Oil Speed Rating n2:4300 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; Grease Speed Rating n1:3600 rpm; d:95.000 mm; Basic Static Radial Load Rating Co:81500 N; B:32.00 mm; D:170.0000 mm;

Grease Speed Rating n1:7000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:28000 N; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:30200 N; Sealed Speed Rating n3:7000 rpm; Accessories:No Shield, no Seal; D:62.0000 mm; B:23.80 mm; d:30.000 mm;

Calculation factor Y1:1.8; Design variant/feature:TQO/WI; Calculation factor Y2:2.7; Basic static load rating C0:21600 kN; Thrust factor K:1.54; r3,4 min.:6 mm; D1 ≈:732 mm; d:620 mm; Comparative axial load rating CFa:370 kN; d1 ≈:656 mm;

d:190.000 mm; Grease Speed Rating n1:1100 rpm; Basic Static Radial Load Rating Co:630000 N; Oil Speed Rating n2:1900 rpm; Basic Dynamic Radial Load Rating C:390000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; D:300.0000 mm; B:92.00 mm;

Calculation factor e:0.35; K:4.5 mm; da min.:88 mm; B2 ≈:75 mm; Reference speed:3000 r/min; d1:75 mm; Calculation factor Y0:1.8; Mass bearing + sleeve:7 kg; Calculation factor Y2:2.9; Basic static load rating C0:530 kN;

R1:122.237 mm; Cap bolt recommended tightening torque:2467.6 N·m; Max. speed for PosiTrac Plus seal:650 r/min; A2:295.275 mm; da:200 mm; P90°:334 kN; ba:83.344 mm; Labyrinth ring (db shaft position):LOR 175; Labyrinth ring (dc shaft position):LOR 164; P120°:207 kN;

d:35.000 mm; D:100.0000 mm; Basic Static Radial Load Rating Co:44000 N; Grease Speed Rating n1:7000 rpm; Basic Dynamic Radial Load Rating C:58500 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:8500 rpm; B:25.00 mm;

Basic Static Radial Load Rating Co:1000000 N; d:240.000 mm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:540000 N; D:390.0000 mm; B:110.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1500 rpm; Grease Speed Rating n1:880 rpm;

RG:3/8 NPT; P150°:58.7 kN; da:104.775 mm; P60°:175 kN; Appropriate attachment bolt size G:0.75 in; Max. speed for Taconite seal:725 r/min; P120°:64.9 kN; J min.:295.275 mm; R1:65.088 mm; Cap bolt recommended tightening torque:298.3 N·m;