30 mm x 50 mm x 20 mm NTN de0678cs12 Bearing

P120°:38.3 kN; Lock washer:W 15; Taconite seal (dc shaft position):TER 46; End plug (suffix Y):EPR 8; Cap bolt, SAE grade:8; P90°:60.9 kN; dc:71.425 mm; H1:101.6 mm; Lock nut:AN 15; Pa:27.1 kN;

Comparative radial load rating CF:570 kN; Design variant/feature:TQO/GWI; D:349.148 mm; r1,2 min.:2 mm; Basic dynamic load rating C:2160 kN; Calculation factor Y2:2.9; T:228.6 mm; d1 ≈:268 mm; Fatigue load limit Pu:455 kN; Basic static load rating C0:5000 kN;

B:15 mm; Mass bushing:0.0012 kg; D:18 mm; Tolerance shaft:h9; Coefficient of friction µ min.:0.06; Tolerance housing:H7; d:16 mm; Permissible sliding velocity v max.:1 m/s; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15;

Calculation factor kr:0.025; Snap ring:SP 62; Calculation factor f0:15; D2 ≈:55.61 mm; C:2.06 mm; D3:59.61 mm; d:35 mm; D:62 mm; ba min.:2.2 mm; Ca max.:3.76 mm;

L:466.725 mm; h:51.594 mm; Mass pillow block:79.7 kg; Bearing:23032 CCK/W33; RG:1/2 NPT; N1:25.4 mm; End plug (suffix Y):EPR 16; R1:79.375 mm; A2:206.375 mm; Cap bolt:2 x 1-8 UNC;

PosiTrac Plus contact element:2 x B10724-53; R1:53.975 mm; Cap bolt recommended tightening torque:298.3 N·m; H2:38.1 mm; H:187.325 mm; Housing:SSAFS 517; Da:150 mm; A1:88.9 mm; da:71.438 mm; Stabilizing ring:SR-17-14;

Accessories:Two Shields; Basic Dynamic Radial Load Rating C:2080 N; D:24.0000 mm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:17000 rpm; Oil Speed Rating Open/Shielded n2:34000 rpm; Basic Static Radial Load Rating Co:1250 N; Grease Speed Rating Open/Shielded n1:28000 rpm; d:15.000 mm; B:5.00 mm

Basic static load rating C0:16.3 kN; Fw:22 mm; Limiting speed:20000 r/min; Ew:26 mm; Mass needle roller and cage assembly:0.0095 kg; Fatigue load limit Pu:1.86 kN; U:13 mm; Reference speed:18000 r/min; Basic dynamic load rating C:10.1 kN;

B2:620 mm; d1:900 mm; Mass withdrawal sleeve:533 kg; G1:70 mm; B1:600 mm; Nut for removal:HM 31/1000; Hydraulic nut:HMV 200 E; d:950 mm; G2:G 1/4; G:Tr 1000x8;

N1:22.225 mm; P120°:72.5 kN; A2:187.325 mm; J max.:368.3 mm; Cap bolt, SAE grade:8; J1:69.85 mm; P180°:81.4 kN; A1:120.65 mm; RG:1/2 NPT; Appropriate attachment bolt size G:0.75 in;

Da max.:650 mm; d:630 mm; ra max.:1 mm; Basic dynamic load rating C:221 kN; da min.:660 mm; Minimum load factor A:19; H:38 mm; Basic static load rating C0:1930 kN; d1 ≈:678 mm; D1 ≈:632 mm;

Fatigue load limit Pu:950 kN; Basic dynamic load rating C:9805 kN; B1:364 mm; d1:460 mm; B2 ≈:376 mm; r1,2 min.:7.5 mm; Calculation factor Y2:2.9; K:12 mm; Da max.:838 mm; G:Tr 500x5;

dk:40.7 mm; α:6 °; d:30 mm; Mass rod end:1 kg; Basic dynamic load rating C:93 kN; l5 ≈:19 mm; B:22 mm; r1 min.:0.6 mm; l7 min.:36 mm; l4 max.:149 mm;

Limiting speed:950 r/min; Recommended diameter for attachment bolts, mm G:12 mm; Basic static load rating C0:19 kN; J7:17 mm; N4:4 mm; Housing:SY 508 M/VZ033; Recommended diameter for attachment bolts, inch G:0.5 in; J:135.5 mm; Fatigue load limit Pu:0.8 kN; Bearing:YSPAG 208;

B:19 mm; r1,2 min.:2 mm; d1:396 mm; d:320 mm; Mass shaft washer:6.35 kg;